Capital Sound Extends its Optocore Network
Capital Sound had been awarded the sound reinforcement contract by promoters AEG Live/Loud Sound — Royal Parks’ new tenant — and the London-based production company deployed the Optocore system that they purchased in 2011 for the Take That Progress Live stadium tour — supplemented by a further eight newly-acquired XR6-FX converters.
Capital Sound technical manager, Ian Colville, said he had no hesitation in specifying this solution to set up the transmission ring covering around 1km of the site. “Optocore was the only transport system that would allow us to create a complete redundant loop over this distance with no hums and buzzes,” he said. “Nothing on copper comes close — and in any case you can't suddenly extend the network by another 200 metres if you realise you need it, as you can with fibre. This solution gives us complete isolation.”
Colville knew that by adding a further six X6R-FX-8AE/8MI converters to the eight already in their inventory they could connect to 11 locations as well as dual redundant units at FOH (plus back-up). Configured with 8-channel AES3 I/O 8-channel Microphone Inputs and Wordclock I/O this provides the capability of 32-channel AES-EBU output.
The redundant units at the FOH tower connect to these remote locations — including nine delay towers, VIP stand and second FOH tower (for lighting control) via the fibre network, carried on catenaries and delivering AES-EBU audio feeds. Connectivity to the Martin Audio PA’s MLA VU Net control network, running the dedicated Merlin management system, was via an Ethernet tunnel — with RS485 data connection to the XTA DP-226 processor ports located in the VIP stand and at the FOH tower.
The network topology was in place by the time AEG-Barclaycard British Summer Time opened up with Bon Jovi on July 5th.
Ian Colville had first taken the decision to adopt an Optocore platform two years ago to feed Take That’s stadium ‘ring’ system (a series of roof-mounted delay clusters instead of traditional delay towers). With the sightline issue taken care of, pristine signal transmission over distances up to 200 metres had been required.
“Experiments to try and transmit this across huge distances via AES over copper or RS-485 showed signal degradation and instability, which would have been unacceptable. The answer was an optical fibre solution and everyone we spoke to pointed towards Optocore.”
In conclusion, he said, “Optocore is an absolutely fantastic system — very intuitive and easy to use and reconfigure.”
Based in Munich, Germany, OPTOCORE is the world market leading provider of high bandwidth, low latency, resilient, scalable and flexible fibre optic based networks for the transmission of audio, video and data. For 19 years, Optocore has been continuously innovating and setting new standards with regards to digital network technology. OPTOCORE GmbH builds and develops synchronous optical fibre and CAT5 based network solutions for broadcast professionals — for fixed installations and live event applications. Utilising leading-edge technology and high-quality components Optocore guarantees durability and therefore long-term market and customer satisfaction. Due to the open system architecture, Optocore’s platform offers other manufacturers the option to transfer conventional standard audio, video and data formats used in the pro audio industry, via a fibre and CAT5 network. Technical expertise, QoS and an extensive support structure are guaranteed to all customers, together with the highest level of quality controls.