Backprint this page

IPT-10G2-HDMI Now Shipping

posted:

15/05/2019

IPT-10G2-HDMI Now Shipping

Bridge HD HDMI to SMPTE ST 2110

Now available, the IPT-10G2-HDMI IP video transmitter bridges traditional HD HDMI signals to SMPTE ST 2110 for IP-based workflows. IPT-10G2-HDMI is compact, rugged and fanless in design, featuring dual 10 GigE SFP+ ports to support hitless switching (ST 2022-7) for redundancy in critical transmission environments.

IPT-10G2-HDMI Mini-Converter is designed to bridge HDMI HD signals to a SMPTE ST 2110 network.

The IPT-10G2-HDMI receives HD baseband video plus eight embedded audio channels on a full-size HDMI 1.4b interface, then formats the data for output as SMPTE ST 2110 over 10 GigE. Associated audio from the video stream is extracted, synchronized, and embedded into the SMPTE ST 2110 stream. Alternatively stereo audio can be fed into the steam from the included RCA inputs.

Features

IPT-10G2-HDMI Mini-Converter transmits a SMPTE ST 2110 essence from an incoming HD HDMI input source.  Providing two SFP+ cases for protection with "hitless switching" (ST 2022-7), it's rugged, fanless, design is ideal for placement in a wide range of scenarios, including on set, and in studios.

advertisment

Key features:

  • SMPTE ST 2110 audio, video transmitter
  • Rugged, quiet, fanless design
  • 1x full size (standard type A) HDMI 1.4b (24/30-bits per pixel) input up to 1080 60p, 4:2:2, 10-bit, YCbCr
  • 2x 10 GigE SFP+ cages for media LAN (providing support for ST 2022-7 "Hitless Switching") with status light 
  • 1x 1 GigE RJ-45 socket for control LAN with status light
  • Full 10-bit pixel processing pipeline
  • 2x RCA analog audio input
  • 1x mini-USB port for initial network configuration with AJA eMini-Setup software
  • Complete control interface on any web browser from a built-in web server
  • Customizable control with AJA REST API
  • Five year international warranty and support

AJA Ships IPR-10G2-HDMI and IPR-10G2-SDI SMPTE ST 2110 Mini-Converters

advertisment

User Control

IPT-10G2-HDMI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration and firmware updates.

  • 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
  • HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
  • 1x USB 2.0 Mini-B (IEC 62680-1) connector
  • AJA eMini-Setup of network parameters
  • Web and REST clients supported
  • NMOS transmit (Discovery, Registration and Control)
    • According to standards IS-04 v1.2 & IS-05 v1.0.
  • AJA REST API (Control Only)
    • Discovery is supported via SSDP, allowing AJA REST API to then be used for Control
    • Discovery is also supported via MDNS, allowing AJA REST API to then be used for Control
  • Ember+ (no Discovery, Control only) v1.6.2

Bridge HDMI Sources to Anywhere on a SMPTE ST 2110 Network

 

With new IP based facilities often requiring integration with traditional baseband sources,  IPT-10G2-HDMI provides a simple solution for converting HDMI sources, and then formatting and transmitting via ST 2110 IP to provide that content to a range of destinations.

advertisment